NB-IoT Module Series
BC660K-GL Log Capture Guide
BC660K-GL_Log_Capture_Guide 20 / 24
Figure 13: Manual Log Saving Successful
4.6.2. Automatic Log Saving
Click "Log"→"Preference" on the main menu of EPAT, and you can enable automatic log saving in the
pop-up window.
Figure 14: Enable Automatic Log Saving
Check "AutoSave Log File" in the pop-up window, and set the size (cannot exceed 1000 MB) of the log
file to be saved automatically and the path to which the file is saved, click "OK" to save the configurations.
To Next Page
Loading...
