Quectel BC95 User Manual

NB-IoT Module Series
BC95 AT Commands Manual
BC95_AT_Commands_Manual Confidential / Released 29 / 58
Parameter
very>[,<IM_CN_Signalling_Flag_Ind>[,<NSLPI>[,<secure
PCO>[,<IPv4_MTU_discovery>]]]]]]]]
[<CR><LF>+CGDCONT:
<cid>,<PDP_type>,<APN>,<PDP_addr>,<d_comp>,<h_co
mp>[,<IPv4AddrAlloc>[,<request_type>[,<P-CSCF_disco
very>[,<IM_CN_Signalling_Flag_Ind>[,<NSLPI>[,<secure
PCO>[,<I Pv4_MTU_discovery>]]]]]]]
[...]]
OK
Test Command
AT+CGDCONT=?
Response
+CGDCONT: (range of supported <cid>s),<PDP_type>,,,(list
of supported <d_comp>s),(list of supported <h_comp>s),(list
of supported <IPv4AddrAlloc>s),(list of supported
<request_type>s),(list of supported
<P-CSCF_discovery>s),(list of supported
<IM_CN_Signalling_Flag_Ind>s) ,(list of supported
<NSLPI>s),(list of supported <securePCO>s),(list of
supported <IPv4_MTU_discovery>s)
[<CR><LF>+CGDCONT: (range of supported
<cid>s),<PDP_type>,,,(list of supported <d_comp>s),(list of
supported <h_comp>s),(list of supported
<IPv4AddrAlloc>s),(list of supported <request_type>s),(list of
supported <p-CSCF_discovery>s),(list of supported
<IM_CN_Signalling_Flag_Ind>s) ,(list of supported
<NSLPI>s),(list of supported <securePCO>s,(list of
supported <IPv4_MTU_discovery>s)) [...]]
OK
<cid> Integer type; specifies a particular PDP context definition. The parameter is local to the
TE-MT interface and is used in other PDP context-related commands. The range of
permitted values (minimum value=1 or if the initial PDP context is supported, minimum
value=0) is returned by the test form of the command.
The <cid>s for network-initiated PDP contexts will have values outside the ranges indicated
for the <cid> in the test form of the +CGDCONT and +CGDSCONT commands.
<PDP_type> String type; specifies the type of packet data protocol. The default value is manufacturer
specific.
X.25 ITU-T/CCITT X.25 layer 3 (Obsolete)
IP Internet Protocol (IETF STD 5 [103])
IPV6 Internet Protocol, version 6
Quectel
Confidential

Quectel BC95 Specifications

General

Brand	Quectel
Model	BC95
Category	Control Unit
Language	English