Quectel BC950K-GL TE-B - Power Consumption Test Steps

NB-IoT Module Series
BC950K-GL_TE-B_User_Guide 25 / 28
J0202
J0206
Figure 15: Schematic Diagram of TE-B Before Modification
4.3.3. Power Consumption Test Steps
Please refer to the following steps to test the current consumption of the module on the modified TE-B：
1. Insert the USIM card;
2. Insert the USB cable into TE-B;
3. When J0206 has been removed, set the output voltage on N6705C to 3.6 V, and connect the positive
and negative wires of N6705C to the two wires (VBAT, GND) welded on J0202 to supply the module
separately;