Quectel LC29H - Page 22

GNSS Module Series
LC29H(AA,BA,CA,DA,EA)_EVB_User_Guide 21 / 24

Figure 10: Firmware Upgrade – Step 2
Step 3: Double-click the “cfg file” selection box to select CFG file, e.g., “flash_download.cfg”.

Figure 11: Firmware Upgrade – Step 3
Step 4: Select the “Serial Port” and “Baudrate” of the COM Port to be used. While the EVB board is in
a power-on state, after clicking the “Start” button, press the RESET_GNSS button on the EVB
(for 100 ms before releasing it) to start downloading.