Quectel LC76G Series - Understanding QGNSS Interface Data

GNSS Module Series
LC76G_Series_EVB_User_Guide 17 / 33
Step 4: Click the “Connect or disconnect” button. The interface shown in the figure below appears
once the module is connected.
Fi
gure 5: QGNSS Interface (Connected)
4.2. GNSS Interface Explanation
You
can view GNSS information, such as C/N
0
message, time, position, speed, and precision in the
QGNSS interface. See the following table to find out more about these parameters.
Table 5: QGNSS Interface Explanation
Icon Explanation
This sky view interface shows the position of the satellites in use.
1) T
he left column icons show the satellites in use and their numbers.
 BDS: 17
 GLO (GLONASS): 5
 GPS: 12
 GAL (Galileo): 0
 QZSS: 0
 NAVIC: 0

SBAS: 0