LTE Module Series
LTE OPEN EVB User Guide
LTE_OPEN_EVB_User_Guide 60 / 62
5.5. Power off Modules
5.5.1. Power off LTE-QuecOpen modules
There are two ways to power off LTE-QuecOpen modules.
One way is to execute AT+QPOWD command, and this is the best and the safest way. The module will
log off from the network and save data before shutdown, but it will be powered on again after shutdown.
For more details about the AT command, please refer to document [5].
The other way is to press down S0302 (PWRKEY) for at least 0.6s, and then the module will be powered
off.
5.5.2. Power off Wi-Fi modules
AT+QWIFI=0 command can be used to power off Wi-Fi modules. For more details, please refer to
document [3] and [4].
To Next Page
Loading...
