5G Module Series
RM500Q-AE&RM502Q-AE Hardware Design
RM500Q-AE&RM502Q-AE_Hardware_Design 58 / 83
Microstrip or coplanar waveguide is typically used in RF layout for characteristic impedance control. The
following are reference designs of microstrip or coplanar waveguide with different PCB structures.
Figure 27: Microstrip Design on a 2-layer PCB
Figure 28: Coplanar Waveguide Design on a 2-layer PCB
Figure 29: Coplanar Waveguide Design on a 4-layer PCB (Layer 3 as Reference Ground)
To Next Page
Loading...
