5G Module Series
RMU500-EK User Guide
RMU500-EK_User_Guide 13 / 28
3 Components/Interfaces
3.1. Components/Interfaces of the EVB
This chapter mainly describes the application of the following EVB interfaces:
⚫ Power supply
⚫ M.2 interface
⚫ USB interface
⚫ (U)SIM interface
⚫ RF cables and antennas
It also provides information about the status indicator LEDs to help you use the EVB.
3.1.1. Power Supply (J101/J301)
The EVB can be powered by an external power adapter through the power jack (J101) on the EVB. It can
be also powered by the USB interface through the power jack (J301) on the EVB.
The following figure shows the power supply interfaces of the EVB.
Figure 3: EVB Power Supply Interfaces
To Next Page
Loading...
