Smart Module Series
Smart_EVB_G5_User_Guide 12 / 66
Support two UART interfaces:
⚫ Main UART for data transmission and AT command communication
⚫ Debug UART for debugging
Support 4-bit SD card with hot-plug detection
MIPI + SPI/I2S interface*
A group of 4-lane MIPI_DSI interface and SPI/I2S interface
Support 2 flashlight LEDs for testing the module’s flashlight function
Support three sensors including ALS/PS, accelerometer/gyroscope and
geomagnetic sensor
A vibrator for testing the motor drive interface of the module
⚫ 4 switches including two power supply switches, one emergency
download switch and one USB selection switch
⚫ 4 buttons including PWRKEY, RESET, VOL DOWN and VOL UP
3 LEDs are available for signal indication
To Next Page
Loading...
