Need help?Do you have a question about the Quectel EG915U-EU and is the answer not in the manual?
General| Brand | Quectel |
|---|---|
| Model | EG915U-EU |
| Category | Control Unit |
| Language | English |
Defines special marks used in the document for clarity on features and models.
Lists supported wireless network types and frequency bands for the EG915U-EU module.
Details the main functional features and specifications of the EG915U-EU module.
Provides a block diagram illustrating the module's major functional parts.
Illustrates the pin assignment of the module with a top view diagram.
Describes the DC characteristics and pin functions of the module's interfaces.
Outlines the different operating modes of the module, such as Idle, Talk/Data, and Sleep.
Describes procedures for reducing current consumption in sleep mode via UART or USB.
Details power supply pins and requirements for the module's stable operation.
Covers module power-on, power-off, and reset procedures using specific pins.
Details the analog audio interfaces and their design considerations for microphone and receiver.
Covers the USB 2.0 interface and USB_BOOT for firmware upgrade.
Details the (U)SIM interface circuitry and supported card types.
Covers I2C, PCM, UART, ADC, and SPI interfaces.
Describes control signals like W_DISABLE# and indication signals for status.
Details cellular network specifications including frequency bands, Tx power, and sensitivity.
Covers antenna reference design and GRFC interfaces for tuners.
Discusses RF routing, antenna requirements, and connector recommendations.
Lists absolute maximum ratings for power supply and pins.
Details power supply ratings and power consumption of the module.
Covers ESD precautions and operating/storage temperature limits.
Describes the mechanical dimensions of the module in millimeters.
Provides the recommended footprint for the module on a PCB.
Shows top and bottom views of the module for identification.
Details recommended storage conditions and handling for the module.
Covers recommended manufacturing and soldering thermal profiles.
Describes the tape and reel packaging specifications for the module.
To Next Page