Need help?Do you have a question about the Quectel EG915U Series and is the answer not in the manual?
General| Operating Temperature | -40°C to +85°C |
|---|---|
| Form Factor | LGA |
| Interface | UART, GPIO, I2C, SPI |
| Power Supply | 3.3V to 4.3V |
| GNSS | GPS, GLONASS, BeiDou, Galileo, QZSS |
| Protocol Support | TCP/UDP/PPP/FTP/HTTP/SSL/MQTT |
| Certifications | CE, FCC, RoHS |
Lists the main technical features of the EG915U series module.
Illustrates the pin layout of the EG915U module.
Details the function and characteristics of each pin.
Outlines the different operating modes of the module.
Details how to reduce module current consumption in sleep mode.
Details power supply requirements and pins.
Describes how to turn on the module.
Explains procedures for turning off the module.
Explains how to reset the module using the RESET_N pin.
Describes the analog audio input and output interfaces.
Details the USB interface capabilities and specifications.
Describes the dual SIM interfaces and their support.
Describes the main, debug, and auxiliary UART interfaces.
Lists the absolute maximum ratings for power supply and voltage.
Details the power supply ratings of the module.
Specifies the transmit RF output power for different frequency bands.
Details the conducted RF receiving sensitivity for different bands.
Shows the physical dimensions of the module.
Provides a recommended footprint for PCB layout.
To Next Page
