14
EN
INSTALLATION AND USE MANUAL QUICK MC² X19 REV002A
4 - Safety
4.2 - Personal protection equipment (PPE)
The personal protective equipment must comply with the national standards pertinent and must be checked, kept efficient
and used according to the manufacturer’s instructions.
PPE for the worker assigned to the installation and ordinary maintenance
Identification
pictogram
Description Notes
HELMET Protective helmet to prevent injuries caused by overhanging loads and knocks
against structures.
GLOVES Use of protective gloves to avoid cuts, punctures or pricks during operation.
SHOES Use of safety footwear to avoid damages caused by materials falling from a
height during stabilizer installation operations.
CLOTHES Use of suitable protective clothing to avoid it getting caught in moving or
transported parts.
EYEGLASSES Protect your eyes with eyeglasses or protecting screens in case of operations
near the hydraulic system in pressure.
4.3 - Stickers/labels on the stabilizer
On the stabilizer will be applied stickers/labels that report dangers and attention to be taken for the correct use.
Label pictogram Description Notes
DANGER DANGER OF CRUSHING HANDS AND FEET
DANGER RISK OF ROLLOVERING CRUSHING
CAUTION MOVING AND ROTATING EQUIPMENT
To Next Page
Loading...
Need help?
General
