QuickLabel Systems pronto! 482 User Manual

Pronto! 482/486/682/863 12-5
Status print
1 Insert printable medium (labels, endless paper) which extends across the
entire printing width.
2 If the printout is to occur using thermal transfer printing, insert transfer
ribbon with the maximum width.
3 Press the menu button.
4 Select Test > Status print menu.
5 Start printout with the ↵ button.
You can cancel the printout with the cancel button.
The Status print function prints a test image containing
information on the configuration and status of the printer. The
printout occurs using the heat level and print speed specified in
the Setup > Print param. menu.
Note: The printout occurs without taking the label gaps into consideration.
This is why endless media are most suitable for this purpose.

QuickLabel Systems pronto! 482 Specifications

General

Brand	QuickLabel Systems
Model	pronto! 482
Category	Label Maker
Language	English