MultiServ Multiband Antennas
QS Series Antenna Installation Guide
INS-AS-004024_E Page 2
1 Installation Overview
This document describes the installation and configuration details for the Quintel antennas as summarized on page1.
Included is a description of the antenna mounting options, antenna port identification and AISG connections for each
specific antenna models.
The mounting kit types supplied with the antenna are detailed below. These kits enable the antenna to be pole mounted
with pre-set mechanical down tilt (-2° to 10°).
NOTE: Images contained in this document are of QS6658-3 product line and may not represent all antennas;
however the bracket components and their installations are common.
1.1 Mounting Hardware Features include:
• Tilt adjustment arm for mechanical tilt.
• Pipe diameter: 30-120mm (1.18 – 4.72 inches) standard.
1.2 Supplied Mounting Hardware
• AS-001184 Lower antenna mounting bracket assembly
• AS-001182 Upper antenna mounting bracket assembly. (Adjustable from -2° to 10°)
• AS-001034 Optional Lightning Finial
1.3 Mounting Hardware Mechanical Specifications
• Weight of kit, kg (15.6 lbs) 4.6 kg (10.1 lbs) AS-001182 Upper mounting bracket
2.0 kg (4.4 lbs) AS-001184 Lower mounting bracket
0.4 kg (0.9 lbs) AS-001034 Lightning finial
• Mounting kit material Aluminium & Galvanized steel
• Packaging material Plastic sleeve
Tools Required
• 18mm (no Imperial equivalent) AF deep socket, spanner wrench
• 18mm Box-End Torque Wrench (40-65 ft lbs)
• 16mm AF socket
and spanner wrench
• 13mm socket and Box-End Torque Wrench (16 ft lbs)
To Next Page
Loading...
General