C-6 Receiving and Installation Cardiac Stress Treadmills User Guide
a. Watch the walking belt carefully to ensure that it
does not drift left or right. Adjust if necessary using
the adjustment procedures in Chapter 3.
b. Listen for unusual noises, such as squeals or squeaks.
The treadmill should run quietly.
c. Reduce speed and grade until the treadmill belt is
moving at a reasonable speed for walking.
d. Walk on the moving belt and verify proper operation
at representative speeds and grades. If the walking
belt slips, but the front roller turns, adjust the
walking belt tension.
7. When the test is finished:
a. Set the treadmill to zero grade.
b. Stop the walking belt.
c. Turn off the monitoring system.
If your treadmill is not running smoothly, contact an
authorized technician before using it.
To Next Page
Loading...
Need help?
General
