Cardiac Stress Treadmills User Guide Introduction 1-3
Hood Configuration Plate for Treadmill
Operation
Except for an optional emergency stop button, all commands,
including walking belt power, speed, grade, and protocol, are
entered from the monitoring system. All patient data will
appear on the monitoring system screen. Use the operator
manual supplied with the monitoring system for instructions
on how to control the treadmill.
As long as the treadmill is plugged into a powered socket and
the circuit breaker is set to
ON, the treadmill is receiving
power, even when the monitoring system power is turned off.
Emergency Stop Button
The treadmill may have an optional emergency stop button
located on the front handrail. When pressed, power to the belt
drive motor and the grade motor is stopped.
♦ The emergency stop button is intended only for emergency use.
You may have to restart the stress test if the emergency stop
button is pressed.
1. Circuit Breaker
2. Power cord
1
2
To Next Page
Loading...
Need help?
General
