1-2 Introduction Cardiac Stress Treadmills User Guide
Treadmill Configuration
Controls
Power
The circuit breaker on the front of the treadmill hood controls
the power to the treadmill (see item 1 in the next drawing).
The circuit breaker must be set to
ON for the treadmill to run.
As long as the treadmill is plugged into a powered socket and
the circuit breaker is set to ON, the treadmill is receiving
power, even when the monitoring system power is turned off.
WARNING! Turn off the treadmill circuit breaker before
connecting or disconnecting the treadmill from the
power outlet.
1. Front of hood
2. Walking belt
3. Rear of treadmill
1
2
3