Page 16
Fastening the RaceChip
When searching for a secure fastening point for the RaceChip, make sure that the wiring harness can be properly routed
in the engine bay in the next installation step. The harness must not, for instance, be routed along engine parts that
become very hot, nor should the harness be routed under tension. Fasten the RaceChip in place using the supplied
cable tie, as illustrated in the image above.
Step 7 of 9
• When selecting a fastening point, make sure that the RaceChip is protected from exposure
to water, heat, and vibrations.
• Do not wrap the RaceChip in an airtight bag as this can lead to a built up of condensation.
To Next Page
Loading...
