ION CHAMBER DOSE SENSORS
The Ion Chamber Dose Sensors feature:
Calibration Accuracy ± 4%, Energy Dependence ± 5%. Plug-and-play.
10X6-6
The General Purpose, in Beam Chamber
A well documented wide dynamic range chamber with many dose
and rate applications.
10X6-6M
The Dedicated Mammography Chamber
A world standard for mammography.
10X6-60
The 'Service' Chamber
This thin profile makes it ideal for low input dose at an image
receptor and many other uses.
10X6-3CT
The Chamber for Computed Tomography Dose Index (CTDI)
Another industry standard.
10X6-180
The Leakage and Low Level Measurements Chamber
For leakage measurements. Cross-section of 100cm
2
. Also for very
low dose to image receptor.
10X6-1800
The Radiation Protection Chamber
For very low-level radiation measurements such as sheilding,
leakage, and environmental. Superior to typical survey meters for
accuracy.
Recommended for starter kit configuration.
Ion Chambers
Radcal ion chambers are recognized for reliable measurements They exhibit excellent energy response.
Their omnidirectional response makes them suitable for leakage and scatter measurements as well an
CT measurements. They are available in specialized configurations for particular systems. Ion chambers
require care in handling, require a bias voltage which must stabilize after bias is applied, and are much
larger than diode sensors.
15
To Next Page
Loading...
Need help?
General
