Radian 3RX - Page 50

Radian® 3RX
50
FORWARD–FACING
INSTALL USING LAP/SHOULDER BELT WITH
5-POINT HARNESS :
1. Unhook and remove top tether
from storage location 2 on back
of seat.
2. Place car seat forward-facing in
back seat of the vehicle. The entire
seat bottom should sit as at as
possible on the vehicle seat.
3. Loosely attach top tether strap.
Do not tighten. Consult vehicle’s
owner manual for specic location.
22–65 lb (10–29.5 kg)
2
3
2
1