diono.com
51
FORWARD–FACING
4. Slide the vehicle seat belt
through the forward-facing belt
path and out the other side.
Buckle it. The seat belt should
lie as at as possible and not be
twisted.
5. IMPORTANT! Lock your
retractor. Slowly pull the shoulder
belt all the way out of the
retractor. You will hear a clicking
sound as the belt retracts. This
is how you know the retrator is
locked. For more information
on locking your retractor, please
review your vehicle owner's manual.
Press down rmly in the center of the car seat. To
tighten, pull from the lap/shoulder belt on the side
nearest to the buckle while feeding the slack back
into the retractor.
6. Tighten the top tether strap.
Push the car seat back while
tightening the tether strap to
remove all the slack.
4
5
6
To Next Page
Loading...
