Radian 3RX - Page 54

Radian® 3RX
54
FORWARD–FACING
INSTALL USING LAP BELT WITH 5-POINT HARNESS:
IMPORTANT: For harnessed forward-
facing installations using a LAP BELT
ONLY with NO top tether anchor point
available, you MUST install the Diono
lap belt cushion.
1. Unhook and remove
top tether from storage
location 2 on back of seat.
2. Place car seat forward-facing in
back seat of the vehicle. The entire
seat bottom should sit at on the
vehicle seat.
3. Loosely attach top tether
strap. Do not tighten. Consult
vehicle’s owner manual for
specic location.
22–65 lb (10–29.5 kg)
2
3
2
1