diono.com
55
FORWARD–FACING
4. Slide the vehicle seat belt
through the forward-facing belt
path and out the other side.
Buckle it. The seat belt should lie as
at as possible and not be twisted.
5. Tighten the vehicle seat belt.
Press down rmly in the center of
the car seat. To tighten, pull on the
loose end of the vehicle lap belt to
tighten it.
6. Tighten the top tether strap.
Push the car seat back while
tightening the tether strap to
remove all the slack.
9. Test for tightness. Grab the seat
at the forward-facing belt path. Try
to move the car seat side-to-side
and front-to-back with the force of
a rm handshake. If the seat moves
less than 1 in (2.5 cm), it is tight
enough. DO NOT test by grasping
the top or back of the car seat.
5
6
7
4
To Next Page
Loading...
