Radio Shack 15-309 - Lock Device

10
Operation
3. To check the second digit, press and hold SET, then press 2. The red LED will flash
repeatedly to indicate the second digit.
4. To check the third digit, press and hold SET, then press 3. The red LED will flash
repeatedly to indicate the third digit.
Lock Device
Lock the device code in your remote so it doesn’t get changed or deleted
unintentionally.
To lock in the code for your current device:
1. Press the device key that you want to lock on your universal remote.
2. Hold down SET, then press 7. The red LED blinks twice. The code for the current
device is now locked and cannot be overwritten.
3. To unlock the current device key, press and hold SET, then press 8. The red LED
blinks twice.
n Note:
• Thelockeddevicescannotbechangeduntilyouunlockthecurrentdevicekeyorreset
your remote.
• Tounlockacodeotherthanthecurrentone,pressthatdevicekeybeforefollowingthe
step 3 to unlock the current device key.