Radio Shack 15-309 - Troubleshooting

13
Additional Info
Additional Information
Troubleshooting
Problem Solution
I press SET and the appropriate
key at the same time but the
remote still doesn’t work.
Press and hold SET, then press the appropriate key.
The remote will not enter the desired mode if buttons are
pressed in the wrong order.
I have tried all the codes under
my device’s brand, my universal
remote still does not work.
Use Manual Search or Auto Search to find the proper codes.
The red LED doesn’t turn off after
I enter the 3-digit code during
Brand Code Setup.
•IftheredLEDturnsoffafterenteringthelastdigitofthe
code, the code number is valid (matches a code in the Code
List).
•IftheredLEDblinksthenstayslitafterenteringthelastdigit
of the code, the code number is invalid (does not match a code
in the Code List). Try the next code for your device.