11
Operation
Lock Volume and Mute
You can lock the volume and mute functions so they work only with one device. For
example, if you’ve locked the volume and mute functions to the TV device key on your
universal remote, you can only control TV volume, even if you are in STB or VCR/DVD
modes.
To lock the volume and mute functions:
1. Press the device key on your universal remote.
2. Hold down SET, then press 5. The red LED blinks twice. The volume and mute keys
are now locked to the current device.
To unlock the volume and mute functions:
Hold down SET, then press 6. The red LED blinks twice.
Reset Your Universal Remote
To restore your remote to factory settings, press and hold down SET and then press 0
until the red LED blinks three times.
To Next Page
Loading...
