Radio Shack 4-IN-1 REMOTE CONTROL User Manual

10
Now, the device you chose will control volume
whenever you press a volume key.
CHANNEL SCAN
You can use your remote control to scan
through the channels of your TV, VCR, or cable
box.
1. Press the device key for the device with
the channels you want to scan (
TV
,
VCR
, or
CBL
). The red light blinks.
2. Point your 4-in-One Remote at the device
you want to scan and press
SCAN
.
The remote control repeatedly scans
through the device's available channels,
stopping on each channel for about 3 sec-
onds.
3. When you see a channel you want to
watch, press any key other than
SCAN
.
Scanning stops.
15-1991.fm Page 10 Wednesday, October 20, 1999 10:37 AM

Radio Shack 4-IN-1 REMOTE CONTROL Specifications

General

Brand	Radio Shack
Model	4-IN-1 REMOTE CONTROL
Category	Remote Control
Language	English