Radio Shack HTX-202 User Manual

Tuning Using the Tune Control
You can quickly tune to a nearby frequency by rotating TUNE on top of the tran-
sceiver.
1. Turn on the transceiver.
2. Press VF.
3. Rotate TUNE counterclockwise to tune down or clockwise to TUNE up. The trans-
ceiver tunes up or down one frequency step per click. To change the fre-
quency step, see “Setting the Frequency Step Rate.”’
T-SQL DITMF +f- LOCK
DSOL BEEP REV PSC
fo GJ Ce)
V-SC M—VFO
Co fC]
¥sc asc 8 CLR
Scanning for Active Frequencies
You can search for activity on a frequency by pressing and holding down aSc
or WSC for at least 1 second. The transceiver begins to scan up or down the full fre-
quency range, and stops on active frequencies. To scan only a selected frequen-
cy range press F+ ASCorF + ¥SC. See “Setting the Scan Options” to see how to
change the scanning range, the frequency step, the scan resume condition, and
the scan delay time. The following are the factory presets for these options.
*
Frequency Step: 15KHz
Scan Resume Condition: Resumes scanning in 10 seconds, regardless of ab-
sence or presence of carrier.
Scan Delay : , Not activated.
Scan Limits: 144 MHz to 148 MHz
To stop scanning, press ¥SC, ASC, CA, PR, MR, VF, or turn off the transceiver.

Radio Shack HTX-202 Specifications

General

Brand	Radio Shack
Model	HTX-202
Category	Transceiver
Language	English