Radio Shack HTX-202 User Manual

a
Using
the
Standard
Memories
Your
transceiver
has
12
standard
memories
into
which
you
can
store
frequently-
accessed
frequencies
for
quick
access.
Follow
these
steps
to
store
frequencies
in
standard
memories.
1. Press VF and tune to a frequency you want to store.
2. Press F and rotate TUNE until the me-
mory number to the left of the frequency 2 46 200
display shows the standard memory you ;
want to store into.
Go
.
Press
F+M-—WR
for
at
least
1
second
to
store
the
tuned
frequency
into
the
selected
standard
memory.
.
- To change the frequency separation or subaudible tones, press MR and
rotate TUNE to select the standard memory you want to change. Then, refer
to
steps
6
through
12
under
“‘Using
the
Calling-Frequency
Memory.
‘‘Each
standard memory can have different settings.
To
set
the
transceiver
to
a
standard
memory,
press
MR.
Then,
rotate
TUNE
or
press
ASC
or
WSC
to
select
one
of
the
12
memories.
To
continuously
scan
standard
memories,
press
MR.
Then,
press
and
hold
down
ASC
or
WSC
for
at
least
1
second.
Note:
The
transceiver
stops
scanning
according
to
the
scan
options
you
have
set.
See
“Setting
the
Scan
Options”
for
more
information.

Radio Shack HTX-202 Specifications

General

Brand	Radio Shack
Model	HTX-202
Category	Transceiver
Language	English