Radio Shack HTX-202 User Manual

12.
If you want to set a different transmit frequency or change the subaudible
tones, press F+M-SET. The transceiver displays TF followed by the trans-
mit frequency.
Rotate TUNE to change the transmit frequency.
To set a transmit subaudible tone frequency, press WSC. The transceiver
displays TC followed by the transmit subaudible tone frequency.
Rotate TUNE to set the transmit subaudible tone frequency.
Note: if you do not want to transmit a subaudible tone, rotate TUNE to set the
transmit subaudible tone to OFF.
. To set a receive subaudible tone frequency, press WSC. The transceiver dis-
plays RC followed by the receive subaudible tone frequency.
. Rotate TUNE to set the receive subaudible tone frequency.
Note: If you do not want to use incoming tone squetch, rotate TUNE to set
the receive subaudibie tone to OFF. Otherwise, you donot hear transmissions
unless the subaudible tone is present.
Press PTT to save the settings and return to the calling-frequency memory
display.
To use the calling frequency memory, press CA at any time. The transceiver im-
mediately goes to the calling frequency and sets the transmit frequency, subau-
dible tones, and tone squeich to the settings you programmed. To return to the
previous settings, press CA again.

Radio Shack HTX-202 Specifications

General

Brand	Radio Shack
Model	HTX-202
Category	Transceiver
Language	English