Radio Shack HTX-202 User Manual

(a
a
a
ara
a
aa
OS
Re
Leen
ee
nena
en
en
SETTING THE DUPLEX SEPARATION DEFAULT
The duplex separation default (offset) controls the offset between the transmit fre-
quency
and
the
receive
frequency
when
you
use
the
transceiver
in
duplex
mode,
as
with
a
repeater.
Typically,
on
the
2-meter
band,
repeaters
receive
at
a
frequen-
cy
600
kHz
lower
or
higher
thanthey
retransmit
(repeat)
on.For
example,
if
a
repeat-
er’s
input
frequency
is
146.340
MHz,
its
output
frequency
is
146.940
MHz.
The
fol-
lowing
is
a
list
of
the
most
commonly
used
repeater
pairs.
Input Frequency
146.07 MHz
146.13 MHz
146.16 MHz
Output Frequency
146.67 MHz
146.73 MHz
146.76 MHz
146.82 MHz
146.85 MHz
146.88 MHz
146.91 MHz
146.94 MHz
146.97 MHz
147.00.MHz
146.25 MHz
146.28 MHz
146.34 MHz
146.37 MHz
146.40 MHz
To operate with a repeater, you must transmit on the repeater’s input frequency
and receive on the repeater’s output frequency. If you frequently use a repeater
that does not have a 600 kHz offset, we recommend you program the repeater
frequency into one of the transceiver’s memories. You can override the default
offset for each memory.
To change the default offset, follow the steps in ‘‘Understanding the Configura-
tion
Menu”
to
display
the
oS
menu
item,
and
rotate
TUNE
to
change
the
offset.
The transceiver lets you set the offset to be in the range from 0 MHz to 4 MHz
in steps as set by the frequency step option.
27

Radio Shack HTX-202 Specifications

General

Brand	Radio Shack
Model	HTX-202
Category	Transceiver
Language	English