21
5. Press
ENTER
to store the fre-
quency into the selected chan-
nel.
Note: If you made a mistake in
Step 4,
Error
appears on the
display. Repeat Steps 4 and 5.
6. To program the next channel in
sequence, repeat Steps 3-5.
To program other channels not
in sequence, repeat Steps 2-5.
SEARCHING FOR AND
TEMPORARILY
STORING ACTIVE
FREQUENCIES
You can search for frequencies using
a limit or direct search, then either
skip selected frequencies or tempo-
rarily store frequencies into monitor
memories.
Limit Search
A limit search lets you search for ac-
tive transmissions within a specified
range of frequencies.
Note:
You can use the scanner’s de-
lay feature while using limit search
(see “Delay”).
Follow these steps to search for ac-
tive frequencies.
1. Press PGM
, then
LIMIT
.
Lo
and a
frequency appear on the display.
2. Using the number keys, enter
the lowest frequency (including
the decimal point) you want to
search within the desired fre-
quency range, then press
ENTER
.
Note:
If you enter an invalid fre-
quency,
Error
appears on the
display. To correct this, simply
repeat the step.
20-414.fm Page 21 Wednesday, August 4, 1999 11:12 AM
To Next Page
Loading...
