Need help?Do you have a question about the Radio Shack PRO-26 and is the answer not in the manual?
General| Type | Handheld Scanner |
|---|---|
| Channel Capacity | 200 |
| Memory | 10 banks of 20 channels each |
| Power Supply | 6 AA batteries or AC adapter |
| Display | LCD |
| Modulation Types | AM, FM |
| Weight | 1.2 lbs |
| Priority Channels | 1 |
| Power | 6V DC |
| Channel Steps | 5, 12.5 kHz |
| Mode | AM, FM |
| Battery Life | Approximately 10 hours |
Explains the available power options for the scanner, including internal batteries and external adapters.
Step-by-step guide on how to install or replace AA batteries in the scanner.
Guidelines for safe listening practices using earphones or headphones to prevent hearing damage.
Identifies and explains the function of each key on the scanner's keypad.
Describes the 10 monitor memories used for temporarily storing frequencies found during searches.
Guide on how to manually program frequencies into the scanner's memory channels.
How to search for transmissions starting from a specific frequency.
How to lock out channels to improve scanning efficiency by skipping continuously active transmissions.
How to set a priority channel to be checked every 2 seconds during scanning.
Provides common frequency ranges used by amateur radio operators.
Details typical services and allocations across various frequency bands.
Provides a list of abbreviations for various services and organizations that use radio frequencies.
To Next Page
