*1 *2
1
1
Enter the desired Irequency in each channel as Enter the limit search Irequency as lollows.
lollows.
1
Press LIMIT and enter the lower Irequency ol the
Enter the desired Irequency with the numeral range to search.
kevs,
!
L---
Press ENTER.
I
Press ENTER to memorize the Irequency. II a
1
wrong Irequency (out
ol
band) is entered, "Error"
will be displayed. Press CLEAR, then enter the
correct Irequency.
Press LIMIT and enter the upper Irequency ol the
range to search.
1
Press PGM to advance to the next channel. Enter
the Irequency and press ENTER. Repeat it to
IPress ENTER.
I
memorize the Irequencies one by one.
1
Press and hold
'"
or T
lor
abour a second to
Press PRI so the priorily channel appears. star! Irequency search (squelch must be on).
1
To rever! to the previous channel, press PRI
To
change
the
receiving mode,
press
again.
AM/FMIWFM.
!
Press numeral keys 1 through 200 and then press
To return to the delault mode, press AMlFMIWFM
PRI.
The
priority channel is set to the newly
while pressing and holding CLEAR.
entered channel.
1
Press
MaN
to store the desired Irequency (10
To call the monitor channel, press
MaN.
monitor channels) in the search mode.
1
Press
MaN
so that the next monitor channel
To continue search, press and hold
'"
or T
lor
appears.
about a second.
!
..
To call the monitor
channel directly, press the
To rever! to the previous channel, press PGM.
numeral keys.
!
Turn on the KEY LOCK switch so the keys will
not tunetion except SCAN, MAN, and LIGHT.
-7-
To Next Page
Loading...
