18
dEFAULt
Appears when you remove all the lock-outs from
the service bank frequencies.
D-Err
Appears when the scanner receives a data error
during wired programming.
DLY
Appears when you program a 2-second delay.
End
Appears when the scanner has finished wired
programming.
Error
Appears when you make an entry error.
FD/PD
Indicates that the scanner is searching the fire/
police service bank.
FLo
ALL-CL
Appears when you remove all the locked-out fre-
quencies during a service bank or direct search.
FLo-FULL
Appears when you try to lock out a frequency
during a search while 50 frequencies are already
locked out.
F L-out
Appears when you start a direct search from a
locked-out frequency.
HAM
Indicates that the scanner is searching the ama-
teur radio service bank.
L/O
(lockout)
Appears when you manually select a channel
that was previously locked out during scanning or
when you review a locked-out frequency.
L-r
Appears when you review the locked-out fre-
quencies.
M
Flashes with a number (1–20) to show which
monitor memory you are listening to.
MAN
Appears when you manually select a channel.
MRN
Indicates that the scanner is searching the ma-
rine service bank.
oFF
tonE
Appears when you turn the key tone off.
20-314.fm Page 18 Monday, December 13, 1999 12:55 PM
To Next Page
Loading...
