46
3. Press
TEXT. A cursor will
appear at the third line.
4. Enter the text using the
numeral keys (see “Text Input
Chart” on Page 48).
Ô
For example, to identify a
channel as “FIRE Ch 6”(for
“Fire Channel 6”):
“F” is the third letter
associated with
3 on the
keypad. Press
3, and then 3.
“I” is the third letter associated
with 4 on the keypad. Press
4,
and then
3.
“R” is the third letter
associated with
7 on the
keypad. Press
7, and then 3.
“E” is the second letter
associated with
3 on the
keypad. Press
3, and then 2.
Space is entered by pressing
./DELAY.
“C” is the third letter
associated with
2 on the
keypad. Press
2, and then 3.
“h” is the second letter
associated with
4 on the
keypad. Press
4, and then
FUNC (for the lower case
set),and then press
2.
Space is entered by pressing
./DELAY.
“6” is the sixth number
associated with
1 on the
keypad. Press
1, and then 6.
Ô NOTE Ô
Ifyoumakeamistake,
press S or T to move to
the character you want
to change, or CLR to
backspace and delete
unwanted characters, or
press and hold CLR to
abort the text entry.
To Next Page
Loading...
