To Next Page
S
Stephen ThomasAug 13, 2025
What to do if the keypad on my Radio Shack Scanner does not work?
- NNathaniel ShafferAug 13, 2025
If the keypad on your Radio Shack Scanner does not work, the keylock might be turned on. Turn off the keylock.
What to do if the keypad on my Radio Shack Scanner does not work?
If the keypad on your Radio Shack Scanner does not work, the keylock might be turned on. Turn off the keylock.
What to do if Radio Shack Scanner keys do not work or display changes?
If the keys on your Radio Shack Scanner do not work or the display changes unexpectedly, try turning the scanner off and then on again, or reset the scanner.
What to do if my Radio Shack PRO-92 Scanner is totally inoperative?
If your Radio Shack Scanner is totally inoperative, there might be a few reasons. First, check the power source - ensure the batteries are not depleted or that the AC or DC adapter is correctly connected. If using an adapter, verify that the barrel plug is fully inserted into the PWR DC 9V jack. Also, make sure the batteries are properly installed, paying attention to the polarity markings in the battery holder. If the batteries are depleted, recharge rechargeable batteries or replace non-rechargeable ones.
Why does my Radio Shack Scanner have poor or no reception?
If you are experiencing poor or no reception on your Radio Shack Scanner, first ensure that an antenna is correctly connected to the scanner. Also, the programmed frequencies might be the same as birdie frequencies. In this case, avoid programming birdie frequencies or only select them manually.
Why does my Radio Shack PRO-92 lock on frequencies with unclear transmission?
If your Radio Shack Scanner locks on frequencies with unclear transmission in scan mode, this might be because the stored frequencies are the same as "birdie" frequencies. Avoid storing birdie frequencies, or only select them manually.
Why is my Radio Shack PRO-92 totally inoperative?
If your Radio Shack Scanner is completely inoperative, there are several potential causes: * **No power:** Check the batteries or ensure the AC or DC adapter is properly connected. * **Adapter issues:** Make sure the adapter’s barrel plug is fully inserted into the PWR DC 9V jack. * **Battery problems:** Recharge or replace the batteries. * **Improper installation:** Ensure the batteries are correctly installed, matching the polarity markings in the battery holder.
Why does my Radio Shack Scanner have poor reception?
If your Radio Shack Scanner has poor or no reception, ensure that an antenna is properly connected to the scanner. Also, avoid programming frequencies that are the same as birdie frequencies, or only select them manually.
What to do if Radio Shack Scanner locks on unclear transmission?
If your Radio Shack Scanner locks on frequencies with unclear transmissions while in scan mode, it might be due to stored frequencies being the same as “birdie” frequencies. Avoid storing birdie frequencies or only select them manually.
General| Brand | Radio Shack |
|---|---|
| Model | PRO-92 |
| Category | Scanner |
| Language | English |
Tracks multiple trunking systems and conventional systems concurrently.
High-speed scanning and searching capabilities for rapid signal detection.
Allows the scanner to check a specific channel every 2 seconds to catch important calls.
Provides alerts for hazardous weather and displays event information from NOAA.
Details powering the scanner with batteries, AC, or vehicle adapter.
Steps to attach the supplied flexible antenna to the scanner.
Decodes talk group IDs for E. F. Johnson LTR trunking systems.
Decodes talk group IDs for Motorola trunking systems.
Decodes talk group IDs for GE/Ericsson EDACS trunking systems.
Instructions for powering on and adjusting the squelch control.
Customizes channels with text tags for easy identification.
Method to skip unwanted channels or frequencies during scanning.
Explains how trunking systems allocate frequencies and identify users.
Methods to store and manage talk group IDs for trunking systems.
Instructions to reset the scanner without clearing memory.
Procedure to clear all stored memory and reset to defaults.
