To Next PageTo Next PageWhy is my Radio Shack PRO-99 Scanner reception poor or not working?
Poor or absent reception on your Radio Shack Scanner can stem from a couple of common issues. First, ensure that an antenna is correctly connected to the scanner. Second, you might be trying to listen to so-called 'birdie frequencies'. If programmed frequencies are the same as “birdie frequencies, avoid programming frequencies or listen to them manually.
What to do if my Radio Shack Scanner is on but will not scan?
If your Radio Shack Scanner powers on but refuses to scan, there are a couple of things to check. Begin by adjusting the SQ knob clockwise. Also, ensure that you have stored frequencies into more than one channel, as the scanner requires multiple channels to scan effectively.
How to fix a Radio Shack PRO-99 keypad that is not working?
If the keypad on your Radio Shack Scanner isn't responding, there are a couple of potential causes. First, check if the key lock is activated and, if so, turn it off. If that doesn't work, the scanner itself might be locked up. Try turning the scanner off and then on again to resolve this.
Why is my Radio Shack PRO-99 Scanner totally inoperative?
If your Radio Shack Scanner isn't turning on at all, there are a couple of things to check: * First, make sure the AC or DC adapter’s barrel plug is fully inserted into the jack. * Second, check the batteries. If they are dead, replace or recharge them.
General| Brand | Radio Shack |
|---|---|
| Model | PRO-99 |
| Category | Scanner |
| Language | English |
Instructions for inserting AA batteries into the scanner.
Procedure for charging rechargeable batteries using an AC or DC adapter.
How to power the scanner using an AC adapter.
How to power the scanner using a vehicle's 12V power source.
Instructions for attaching the scanner's included antennas.
Guidance on connecting external base-station or mobile antennas.
How to connect earphones or headphones for private listening.
Instructions for connecting an external amplified speaker.
How to attach the supplied belt clip for carrying the scanner.
Explanation of the functions of each key on the scanner's keypad.
Information on preprogrammed service banks and their usage.
Step-by-step instructions for powering the scanner on and off.
Overview of the scanner's function menu and its options.
Details on the preloaded car numbers and frequencies for racing.
Procedure for storing car numbers and their associated frequencies.
How to recall and view frequencies linked to a specific car number.
Steps to delete a frequency from a car number's association.
How to assign text labels to channels for identification.
Procedure to erase all stored frequencies and data from the scanner.
How to enable or disable specific channel storage banks during scanning.
Procedure to listen to a specific channel in manual mode.
How to program CTCSS codes for selective reception.
Steps to enable or disable CTCSS for a selected channel.
How to identify CTCSS codes used on specific frequencies.
How to find CTCSS codes while searching through frequency bands.
How to search for and save active radio frequencies.
Scanner's alert system for serious weather conditions.
Feature to scan channels and not miss important calls.
Setting a 2-second delay to avoid missing replies after a transmission.
Procedure to skip specific channels during scanning.
How to view all channels that have been locked out.
Procedure to remove lockouts from all channels.
How to lock out specific frequencies during a search.
How to view frequencies locked out within a search bank.
Procedure to remove a single locked-out frequency.
Procedure to remove all locked-out frequencies from a specific search bank.
How to adjust the display backlight timer.
How to enable or disable the audible key press tones.
Procedure for programming the scanner using radio signals.
Information on National Weather and Birdie frequencies.
Common radio activities and their corresponding frequency bands.
