52
You can still manually select and
monitor a locked-out car number
frequency.
To remove the lockout from a car
number frequency:
1. Enter the car number All
Frequency mode.
2. Repeatedly press
FUNC then
SCAN to select locked-out car
number frequency.
3. Press
FUNC then 3/L/OUT.
Locking Out Channels
To lock out a channel while
scanning, press
FUNC and then
3/L/OUT when the scanner stops
on the channel.
To lock out a channel manually,
select the channel and then press
FUNC, 3/L/OUT so L appears in the
display.
You can still manually select and
monitor locked-out channels.
To remove the lockout from a
channel, manually select the
channel and press
FUNC and then
3/L/OUT so L disappears.
Reviewing the Lock-Out
Channels
To review all locked out channels,
press and hold
FUNC for about 2
seconds and then press
7 and 1.
Repeatedly press
^
or v to
advance to the next locked out
channel.Ô
Ô NOTES Ô
If you want to remove the
lockout from a channel,
simply press
3/L/OUT
to remove the lockout.
20-515Change01_04.fm Page 52 Friday, January 16, 2004 1:14 PM
To Next Page
Loading...
