Radio Shack PRO-99 - OPERATING YOUR SCANNER; Service Banks; TURNING ON THE SCANNER; FUNCTION MENU

18
Service Banks
The scanner is preprogrammed
with the frequencies allocated by
car, marine, FRS/GMRS/MURS,
police/fire, aircraft, and ham radio
bands. This is handy for quickly
finding active frequencies instead
of searching through an entire
band (see “Searching a
Preprogrammed Frequency
Range” on Page 40).Ô
OPERATING YOUR
SCANNER
TURNING ON THE
SCANNER
1. To turn on the scanner, turn
VOL clockwise.
RadioSahck Race Track PRO
appears. After 3 seconds,
Input Car# appears.
2. To turn off the scanner, turn
VOL counterclockwise to
OFF.Ô
FUNCTION MENU
When you press FUNC for about 2
seconds, the menu screen
appears. Various operations can
be done from this menu. The
structure of the menu is as shown
below:
1:Pre-Load CAR
(Pre-load car number frequency)
1:NASCAR Nextel
2:Busch Series
3:Craftman Truck
4:INDY
Ô NOTE Ô
The frequencies in the
scanner’s service banks
are preset. You cannot
change them. See
“Search Band Charts” on
Page 42.
20-515Change01_04.fm Page 18 Friday, January 16, 2004 1:14 PM