78
assume you are saving to V-
Scanner folder 1, and have
previously stored a V-Scanner
configuration with the name
“My V-Scanner” in that
location. If you choose V-
Scanner Folder 1, the
scanner will display:
Press
ENTER to accept the
choice, another number key
to change your selection, or
CLR to abort and return to the
V-Scanner menu. The
scanner gives you one final
opportunity to abort before
proceeding:
Press
ENTER to confirm your
choice and proceed with the
V-Scanner save operation.
While saving, the scanner will
display:
The contents of the selected
V-Scanner folder will be
replaced with your current
working memory data.
4. To load the contents of a V-
Scanner folder to the
scanner’s working memory,
press
2. The scanner will
display:
Press the number key that
corresponds with the V-
Scanner folder you wish to
load into the scanner’s
working memory, or press
CLR to return to the V-
Scanner menu. If you select a
V-Scanner folder, the scanner
will prompt you to verify your
choice. For example, if you
Save to
V-Scanner: 1
ENTER if YES
My V-Scanner
Save to
V-Scanner: 1
ENT= CONFIRM
My V-Scanner
Saving to
V-Scanner: 1
Please Wait
Load from
V-Scanner:
ENTER if YES
CL to EXIT
Load from
V-Scanner: 1
ENTER if YES
My V-Scanner
To Next Page
Loading...
