Radioddity FS-T1 - Bclo; Ring; Weather Forecast

Procedure 3.10 setting TOT
1. Press the [MENU] key to enter the menu.
2. Use the △ and ▽ keys to enter menu-11:TOT.
3. Press the [MENU] key to select.
4. Use the △ and ▽ keys to select: OFF/30S/60S/90S/120S/150S/180S.
5. Press the [MENU] key to confirm and save.
6. Press the [MONI] key to exit.
BCLO
while using the channel, the transceiver will beep and will not be sent.
Procedure 3.11 setting BCLO
1. Press the [MENU] key to enter the menu.
2. Use the △ and ▽ keys to enter menu-12:BCLO.
3. Press the [MENU] key to select.
4. Use the △ and ▽ keys to select: ON/OFF
5. Press the [MENU] key to confirm and save.
6. Press the [MONI] key to exit.
RING (Incoming call tone)
There are ten types of incoming call tones on the radio. You can select the call tone by short
press button.
Procedure 3.12 setting transmission power
1. Press the [MENU] key to enter the menu.
2. Use the △ and ▽ keys to enter menu-13:RING.
3. Press the [MENU] key to select.
4. Use the △ and ▽ keys to select: 1/2/3/4/5/6/7/8/9/10.
5. Press the [MENU] key to confirm and save.
6. Press the [MONI] key to exit.
WEATHER FORECAST
This feature is only available in the US version
1. This feature sets the weather switch selection for you.
Procedure 3.13 setting WEATHER FORECAST
1. Press the [MENU] key to enter the menu.
2. Use the △ and ▽ keys to enter menu-14:WEATHE
3. Press the [MENU] key to select.
4. Use the △ and ▽ keys to select: ON/OFF.
5. Press the [MENU] key to confirm and save.
6. Press the [MONI] key to exit. If the menu option is ON, enter the weather forecast mode,
otherwise return to normal operation mode