Chapter 3 - Basic operation
Quick Start Guide
Carefully open the box and remove radio body, battery.
Install battery in radio body until it clicks (be gentle!)
Turn on power knob by twisting gently counter clockwise. The radio will respond with
Open the radio .
Select your desired channel, Press the PTT and talk!
RX code
CTCSS (Continuous Tone Coded Squelch System)/ (Digital Coded Squelch) you may sometimes
want to hear calls from only specific persons or groups. In this case, use the selective call which
allows you to ignore unwanted calls from other persons who are using the same frequency.
CTCSS or DCS is a sub-audible tone and is selectable from among the 50 or 104 tone frequency
listed.
Procedure 3.1 setting RX code
1. Press the [MENU] key to enter the menu.
2. Use the △ and ▽ keys to enter menu-01:RXCODE
3. Press the [MENU] key to select.
4. Use the △ and ▽ keys to select: OFF/67.0-754N(754I)
5. Press the [MENU] key to confirm and save.
6. Press the [MONI] key to exit.
TX code
Procedure 3.2 setting TX code
1. Press the [MENU] key to enter the menu.
2. Use the △ and ▽ keys to enter menu-02:TXCODE
3. Press the [MENU] key to select.
4. Use the △ and ▽ keys to select: OFF/67.0-754N (754I)
5. Press the [MENU] key to confirm and save.
6. Press the [MONI] key to exit.
Note:
CTCSS and DCS will not cause your conversation to become private and confusing. It only
saves you from listening to unwanted conversations.
SQUELCH LEVEL
The purpose of squelch is to mute the speaker when no signals are present (Squelch OFF).
With the squelch level correctly set, you will hear sound only while actually receiving signals
(Squelch ON).
Procedure 3.3 setting squelch level
1. Press the [MENU] key to enter the menu.
2. Use the △ and ▽ keys to enter menu-03: SQL
3. Press the [MENU] key to select.
4. Use the △ and ▽ keys to select: 0-9
To Next Page
Loading...
