15 16
Chapter 4 ‒ Computer Programming
High/Low Power Clear Tail
TOT
High/low power only can be switched on the software. Clear tail only can be adjusted on the software. During the call, the transmitter releases the PTT
button to stop transmitting, and the receiver will receive a harsh “click” sound called the tail sound.
TOT only can be adjusted on the software. This feature provides a safety switch, which limits
transmission time to the programmed value. This will promote battery conservation by not allowing you
to make excessively long transmissions, and in the event of a struck PTT switch, it can prevent
interference to other users as well as battery depletion.
Programming software is available at www.radioddity.com/support.
Before programming, please purchase the programming cable, which is available on radioddity.com.
To Next Page
Loading...
Need help?
General
