20 21
ENGLISH
Service and maintenance
Regularly check your equipment for correct operation by using the Self-Test function
and eCert.
The locator and transmitter are designed so that they do not require regular recalibration.
However, as with all safety equipment, it is recommended that they are serviced and
calibrated at least once a year either at Radiodetection or an approved repair center.
NOTE: Service by non-approved service centers may void the manufacturer’s
warranty.
Details of Radiodetection offices and distribution partners can be found at
www.radiodetection.com.
Radiodetection products, including this guide, are under continuous development and
are subject to change without notice. Go to www.radiodetection.com or contact your
local Radiodetection representative for the latest information regarding the RD7200
locator or any Radiodetection product.
Self-Test
RD7200 locators incorporate an enhanced Self-Test feature. In addition to the typical
checks for display and power functions, the RD7200 applies test signals to it’s locating
circuitry during a Self-Test to check accuracy and performance. We recommend that a
self-test is run at least weekly, or before each use.
Running a Self-Test
We recommend that a Self-Test is run at least weekly, or before each use. As the Self-
Test tests the integrity of the locate circuity, it is important that it is carried out away from
larger metallic object such as vehicles, or strong electrical signals. To run a Self-Test:
1. Press the
key to enter the menu.
2. Scroll to the INFO menu using the
or
arrows.
3. Press the
key to enter the INFO menu.
4. Select TEST using the
or
arrows.
5. Press the
key to select YES.
6. Press the
key to begin the Self-Test.
7. Once the Self-Test is completed, the result (PASS or FAIL) will be displayed.
8. Restart the locator using the
key.
RD Manager Online PC Software
RD Manager Online is the RD7200 locator system PC companion, and it allows you
to manage and customize your locator. RD Manager Online is also used to retrieve
and analyze survey and usage data, run an eCert calibration, and to perform software
upgrades.
You can use RD Manager Online to register your products to obtain an extended
warranty, setup your locator by performing a number of maintenance tasks such adjusting
date and time, activating and de-activating active frequencies, or by setting-up functions
like StrikeAlert.
RD Manager Online is compatible with PCs running Microsoft Windows 64 bit operating
system. To download RD Manager Online, go to www.radiodetection.com.
If you do not have internet access, or wish to receive RD Manager Online on a USB flash
device contact your local Radiodetection office or representative.
For more information about RD Manager refer to the RD Manager operation manual.
© 2021 Radiodetection Ltd. All rights reserved. Radiodetection is a subsidiary of SPX Corporation. RD7200, Power Filters, Peak+,
eCert, StrikeAlert, SideStepAuto, RD Manager Online and Radiodetection are either trademarks of Radiodetection in the United States
and/or other countries. Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and /or
other countries. Due to a policy of continued development, we reserve the right to alter or amend any published
specification without notice. This document may not be copied, reproduced, transmitted, modified or used, in
whole or in part, without the prior written consent of Radiodetection Ltd.
To Next Page
Loading...
Need help?
General
