ENGLISHDEUTSCHESpAñoLFRANÇAISITALIANoNEDERLANDS
17
SurveyCERT
™
The RD8000 and SurveyCERT make it easy to record your cable and pipe survey
using your computer or PDA. With Bluetooth
®
you can conveniently send survey
measurements stored on your RD8000 receiver to your preferred device. SurveyCERT is
bundled with the Centros Manager application suite and is available as a free download
from www.radiodetection.com.
Installing SurveyCert
SurveyCERT is easy to download and install. Follow the instructions on the
printed eCAL Guide or the downloadable Centros Manager Operation Manual.
Copy the SurveyCERTpda.exe le in the Centros Manager installation directory
to your PDA using ActiveSync. For more information on ActiveSync transfers,
please read your PDA’s documentation.
Pairing with your PDA
The pairing process for PDAs greatly differs depending on its brand and software. Please
read your PDA’s documentation before you proceed.
On the receiver
Switch your RD8000 on and press the key to enter the menu.
Bluetooth options are located in the BT menu, you can nd it by using
the or keys to scroll through the options.
Press the key to enter the BT menu.
Scroll to the PAIR menu using the or keys and press key to enter.
Scroll to the BT-PC option.
Press the key when you are ready to pair and the RD8000 will begin the
pairing process.
Now follow the instructions for the PDA.
NOTE: You must complete the PDA procedure within 90 seconds to
prevent the receiver’s Bluetooth
®
connection from timing out.
On your PDA
Your PDA may function very differently from the procedure suggested in the
following steps.
From the Start menu on the PDA, select Settings, then select the Connections
Tab and then select the Bluetooth® icon.
Switch the Bluetooth® Radio on and make sure your PDA is visible to other
devices.
Select the Devices tab and scan for new partnerships.
1.
2.
1.
2.
3.
4.
5.
6.
7.
1.
2.
3.
To Next Page
Loading...
Need help?
General
