38
To set an entry, press and hold the ENT key on the current entry and a submenu
will pop up
选择
Edit
进入编辑条目
Input name: Name of the current entry. Use the scroll wheel to select a letter or
number. Press and hold the ENT key to switch between upper and lower case.
Press the ENT key to switch to the next character.
Line name: Because each entry can have multiple lines of configuration, you can
give each line a name to avoid confusion in the future
Source: Press and hold the ENT key to enter the input source selection menu.
Scroll up or down to the desired category and press ENT to select the
corresponding input source
To Next Page
Loading...
