54
The following functions are triggered by the switch selected above
Coach mode enable switch, it is recommended to set to SH rebound switch,
this switch is used to activate or stop the operation of the student machine
One-touch saves the current gimbal position as a fine-tuning value
Reset, you can choose to reset all or reset one way individually. The
content of the reset option is the same as that in the main interface.
Used to set the timer, set the timer time and turn on when the switch is
turned on
Adjust the global variable Gvar and enter a fixed number directly
Press and hold the ent pop-up menu to change the way to set Gvar.
There are three options:
Mixer Source: Set the value of Gvar with an input source
Global var, another global variable
Inc / Decrement: increase or decrease
Select a knob or slider to adjust the volume
Use the switch to set the receiver's runaway protection anytime,
anywhere
Play a sound
! 1x: Play sound once, not at startup
To Next Page
Loading...
