Radionics D6500 - Page 51

Modem IIIa
2TM
Messages for the D7212, D7412, D9112, D9124 and D9412 Control/Communicators
D6500 Computer Interface Manual
74-05313-000-G 10/16/97 Page 47 © 1988-1997 Radionics, Inc.
Signal Internal/External Printer 6500 Output Mode SIA Output Mode
Fire Trouble
dd/dd tt:tt ql ACCT aaaa FIRE TROUBLE
h1rrlssssssaaaaGsspppt <header>[#aaaa|NriaFTppp]
+++ ACCT aaaa AREA=a POINT=ppp
Fire Walk End
dd/dd tt:tt ql ACCT aaaa FIRE WALK END
h1rrlssssssaaaasRsssFt <header>[#aaaa|NriaFK]
+++ ACCT aaaa AREA=a
Fire Walk Start
dd/dd tt:tt ql ACCT aaaa FIRE WALK START
h1rrlssssssaaaasTsssFt <header>[#aaaa|Nria/idiiiFI]
+++ ACCT aaaa AREA=a ID=iii
Force Armed
dd/dd tt:tt ql ACCT aaaa WAS FORCE ARMED
h1rrlssssssaaaasWsssst <header>[#aaaa|NCW]
Forced Close Early by Area
dd/dd tt:tt ql ACCT aaaa FRC CLOSE EARLY
h1rrlssssssaaaasCsiiit <header>[#aaaa|Nria/idiiiCF]
+++ ACCT aaaa AREA=a ID=iii
Forced Close Late by Area
dd/dd tt:tt ql ACCT aaaa FORC CLOSE LATE
h1rrlssssssaaaasCsiiit <header>[#aaaa|Nria/idiiiCF]
+++ ACCT aaaa AREA=a ID=iii
Forced Close Perimeter
dd/dd tt:tt ql ACCT aaaa F CLOSE PR DLAY
h1rrlssssssaaaasCsiiit <header>[#aaaa|Nria/idiiiNF]
Delay by Area
+++ ACCT aaaa AREA=a ID=iii
Forced Close Perimeter
dd/dd tt:tt ql ACCT aaaa F CLOSE PR DLAY
h1rrlssssssaaaasCsssst <header>[#aaaa|NriaNF]
Delay by Area
(ID not reported)
+++ ACCT aaaa AREA=a
Forced Close Perimeter
dd/dd tt:tt ql ACCT aaaa F CLOSE PR INST
h1rrlssssssaaaasCsiiit <header>[#aaaa|Nria/idiiiNF]
Instant by Area
+++ ACCT aaaa AREA=a ID=iii
Forced Close Perimeter
dd/dd tt:tt ql ACCT aaaa F CLOSE PR INST
h1rrlssssssaaaasCsssst <header>[#aaaa|NriaNF]
Instant by Area
(ID not reported)
+++ ACCT aaaa AREA=a
Forced Closing by Area
dd/dd tt:tt ql ACCT aaaa FORCED CLOSE
h1rrlssssssaaaasCsiiit <header>[#aaaa|Nria/idiiiCF]
+++ ACCT aaaa AREA=a ID=iii
Forced Point
dd/dd tt:tt ql ACCT aaaa FORCED POINT
h1rrlssssssaaaasTspppt <header>[#aaaa|NriaXWppp]
+++ ACCT aaaa AREA=a POINT=ppp