Radionics D6500 - Page 53

Modem IIIa
2TM
Messages for the D7212, D7412, D9112, D9124 and D9412 Control/Communicators
D6500 Computer Interface Manual
74-05313-000-G 10/16/97 Page 49 © 1988-1997 Radionics, Inc.
Signal Internal/External Printer 6500 Output Mode SIA Output Mode
Opening by Area
dd/dd tt:tt ql ACCT aaaa OPENING REPORT
h1rrlssssssaaaasOsiiit <header>[#aaaa| Nria/idiiiOP]
+++ ACCT aaaa AREA=a ID=iii
Opening Early by Area
dd/dd tt:tt ql ACCT aaaa EARLY TO OPEN
h1rrlssssssaaaasOsiiit <header>[#aaaa|Nria/idiiiOK]
+++ ACCT aaaa AREA=a ID=iii
Opening Late by Area
dd/dd tt:tt ql ACCT aaaa LATE TO OPEN
h1rrlssssssaaaasOsiiit <header>[#aaaa|Nria/idiiiOJ]
+++ ACCT aaaa AREA=a ID=iii
Parameters Changed
dd/dd tt:tt ql ACCT aaaa PARAMS CHANGED
h1rrlssssssaaaasNsD02t <header>[#aaaa|NYG]
Parameter Checksum Fail
dd/dd tt:tt ql ACCT aaaa PARMS BAD CKSUM
h1rrlssssssaaaasTsD15t <header>[#aaaa|NYF]
Parameter Checksum Fail
dd/dd tt:tt ql ACCT aaaa PARMS BAD CKSUM
h1rrlssssssaaaasTspppt <header>[#aaaa|NpidddYFppp]
(SDI Device and Point reported)
+++ ACCT aaaa POINT=ppp SDI=ddd
Perimeter Delay by Area
dd/dd tt:tt ql ACCT aaaa PERM DLAY ARMED
h1rrlssssssaaaasCsiiit <header>[#aaaa|Nria/idiiiNL]
+++ ACCT aaaa AREA=a ID=iii
Perimeter Delay by Area
dd/dd tt:tt ql ACCT aaaa PERM DLAY ARMED
h1rrlssssssaaaasCsssst <header>[#aaaa|NriaNL]
(ID not reported)
+++ ACCT aaaa AREA=a
Perimeter Instant by Area
dd/dd tt:tt ql ACCT aaaa PERM INST ARMED
h1rrlssssssaaaasCsiiit <header>[#aaaa|Nria/idiiiNL]
+++ ACCT aaaa AREA=a ID=iii
Perimeter Instant by Area
dd/dd tt:tt ql ACCT aaaa PERM INST ARMED
h1rrlssssssaaaasCsssst <header>[#aaaa|NriaNL]
(ID not reported)
+++ ACCT aaaa AREA=a
Phone Line Fail
dd/dd tt:tt ql ACCT aaaa PHONE LINE FAIL
h1rrlssssssaaaasTsssBt <header>[#aaaa|NLT1]
(Line 1)
+++ ACCT aaaa PHONE LINE=1
Phone Line Fail
dd/dd tt:tt ql ACCT aaaa PHONE LINE FAIL
h1rrlssssssaaaasTsssCt <header>[#aaaa|NLT2]
(Line 2)
+++ ACCT aaaa PHONE LINE=2